# MD5 checksums generated by MD5summer (http://www.md5summer.org)
 # Generated 7/10/2008 12:35:27 PM

 f71f0a42f6dba334c63a5cce1b26e8b2 *pro_zas.zip

 This checksum reflects the 'pro_zas.zip' ZAS version 2.72 file .

 If one is using the freeware 'md5summer.exe' program,
 the 'pro_zas.md5' file can be used to perform a md5 checksum on the 'pro_zas.zip' file.

 FYI,
 it is recommended that previous versions of ZAS for the AED PRO
 be removed prior to installing this latest AED PRO ZAS program.

 If there are any CONFIG files, 
 or other files that have been saved within the ZAS installation folder,
 they should be copied/saved to a temporary location
 so that no useful files are lost during the un-installation process.

 After removing the previous version of ZAS for the AED PRO,
 unzip the latest "pro_zas.zip" file into a temporary folder.

 Within the temporary folder, a "setup.exe" file can be run,
 which will install version 2.72 ZAS for the AED PRO.

 After 'version 2.72 ZAS for the AED PRO' has been installed,
 launching the ZAS program will allow the user to display
 the following BOOT and PROG version information:

 +-----------------------------------------------------------------------+
 |                                                                       |
 |                         Release Name: 9213-0070                       |
 |                                                                       |
 +-----------------------------------------------------------------------+
 |                                                                       |
 | Name              Type   Version     HW. Vers    Size     Date        |
 | ==============    ====   =======     ========    ======   ==========  |
 | AP-Boot160.loa    BOOT    01.60                  60160    06/20/2008  |
 | AP-Prog275.loa    BOOT    02.75                  743680   08/07/2008  |
 |                                                                       |
 +-----------------------------------------------------------------------+
 
 
 If an AED PRO is updated
 (either through the ZAS Version 2.72 program or it's appropriate / equivalent WIZARD),
 then the information that will be displayed on the LCD screen
 when the device is powered up into non-Rescue mode
 will be similar to the following:


     +---------------------------------------------------------------+
     |                                          00.00.xx       +     |
     | VERSIONS                                               |_|    |
     |  B:01.60   L:01.68    P:02.75                          |_|    |
     |  H:03.00   C:02.00                                     |_|    |
     |                                                               |
     |                                                               |
     |                                                               |
     |                                                               |
     |                                                               |
     |                                                               |
     |                                                               |
     |                                                               |
     |     -------------------------+-------------------------       |
     |            USB               |         SET TIME               |
     |                                                               |
     +---------------------------------------------------------------+


 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 

 As of July-2008,
 the latest AED PRO ZAS program will be momentarily identified 
 as ZAS Version 2.72 on it's initial SPLASH screen.

 This version information can be recalled
 by clicking on the "Help" menu and then selecting "About ZAS".

 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 

 It should be noted that AED Pro with serial numbers previous to AA06F
 may not operate as expected with the 'ZOLL SurePower Battery Pack' batteries.

 Contact ZOLL in order to obtain clarification for pre 'AA06F' devices
 that are intended to be used with the 'ZOLL SurePower Battery Pack' batteries